Production process for soft capsules:
The production process of soft capsules is as follows: ingredients, gelatinization, pill pressing, drying, pill picking, inner packaging, quality inspection, outsourcing
Batching refers to the raw materials and accessories in the batching tank mixed heating, prepared to meet the standard of pure oil or non-pure oil substances, forming the content can enter the next process.
In addition, if propolis, fish oil taurine and other raw materials contain solid powder, but also need to mix with oily ingredients, grinding machine into paste, to avoid solid-liquid stratification.
Gelatinization is the process of putting solid granular gelatin into the gelatinizer by means of vacuum suction, adding pure water to melt into a proper viscosity of the gelatinizer, and then used in the production of pellets. In order to ensure quality, the production process must be on the viscosity of the glue filtration and regular testing
Pill press refers to the production of the content and rubber delivery to the pill press production line, the production of pills. The process is as follows: at the left and right ends of the equipment, near the middle, there is a rubber plate. When they are about to meet, the small tube above will inject a certain amount of content, and then through the mold and spray the role of the content will be wrapped in rubber sheet peel. The process is similar to that of making dumplings. The balls are soft after pressing. The soft capsule needs to be dried in the drying room to form the pellets. The scientific two-stage drying technology of low temperature and high temperature is adopted, which greatly improves the drying efficiency.
The dried pills will be transported to the pill concentrator. The pill with uneven shape is selected automatically by the pill selecting device. Then the qualified products for artificial light inspection, further remove the ball bubbles and other non-qualified products.
Packing qualified products.
